AAC Autoclave-Separator

Recommended application:

Separator used for out of autoclave section,The bricks after steaming will have certain sticky ,Use separator to separate blocks.

Working principle:

When finished product transport to the bottom of separator to separate the finished products layer by layer from up to down (upper separating part clamp tightly up finished product block,lower layer separator clamp tightly lower finished product block,finished this,extend separator oil cylinder, to separate upper separating parts and lower layer separating parts, then separate block,and so on.

Features:

AAC blocks easily stick together again after steamed,separator automatically separate it layer by layer before packing.

Eliminate waste blocks,substandard blocks caused by stick,Promise packing running normal at the same time.

Separator can clamp tightly blocks equally,average error small,to make sure separating quality.

Separator hydraulic system design every clamper alone control system,can freely choose clamping and separating position.

Separator clamping power can freely adjust,Automatic stop and add pressure when reach to setup clamping power ,keep clamping ,Suitable of different strength levels blocks.

Separator speed,distance and separating power can adjust based on use situation.

Separator lifting drived by hydraulic ,finished by transmission device and abutment beam,transmission device has imported encode,can accurately control the block lifting position;lifting speed and powder can adjusted based on request.

Separator setup have automatic and manual operation ways,on hydraulic transmission oil recycle tube setup coarse, fine filter,Automatic alarm when local clogging occurs in the filter,automatic emergency treatment.

Packing & Shipping:

Package conforms to the requirements of customs.

Structure:

AAC block separator is composed of cross beam,vertical beam,separating parts and lifting trolley .

Cross beam,vertical beam,separating parts and lifting trolley are made of shape steel,assembled by steel plate.

Power provided by hydraulic station.

After-sales service:
1.Provide engineers abroad installation and commissioning service.
2.Held online or site training for workers to ensure the safe operation.

3.Our expert will answer any inquiry within 24-48 hours and it will be solved as soon as possible.

4.We supplies the complete technical documents and the relative drawings of the electric components which were written in Chinese and English.

5.Service is available lifelong.

Formerly known as Wuxi SANKON Automation Equipment Co., Ltd., Jiangsu SANKON Building Materials Technology Co. is an enterprise specializing in the research and development and production of a complete range of autoclaved aerated concrete (AAC) machines and AAC production lines. Since 2007, we have introduced a number of new types of building materials equipment. We have been actively analyzing cutting-edge technology from all over the world and have formed a professional technology team focused on the development of new and exciting processing equipment.

In July, 2014, Jiangsu SANKON Building Materials Technology Co., Ltd. was officially founded in Chuanjiang Town, Xinbei District, Changzhou City, Jiangsu Province, with a factory covering 44700 square meters. Today, we have more than 200 employees. The AAC machines manufactured by SANKON has been exported to a wide range of countries, like Russia, India, Iran, Saudi Arabia, Malaysia, Indonesia, Thailand, Vietnam, the United Arab Emirates, and more.

Professionalism
SANKON has always focused on the design and production of high efficiency AAC machines, resulting in the accumulation of valuable experience and engineering techniques.

Our technical team is made up of experts with more than 20 years of experience in the AAC industry. They are professionals with expertise in project design, production processes, and detail control. Some of them worked for the China AAC Institute before they came to SANKON, then they focused all of their efforts into the AAC industry.

With this excellent technical team, we are able to offer clients solutions and equipment that meets all relevant production quality requirements, as well as help building materials manufacturers maximize their economic returns.

Autonomous Production
With an annual production capacity of more than 9 thousand tons of equipment and workshops covering about 25 thousand square meters, SANKON is able to autonomously complete machining, painting, assembling, and testing processes. Parts like metal bodies, hydraulic pressure stations, electric control cabinets and so on are all produced by SANKON.

We are able to offer complete sets of equipment for AAC production line. SANKON is also able to precisely control the function and quality of each piece of equipment to meet customer needs.

Continuous Innovation
Based on German technology, we developed the AAC production lines with additional specifications. At the same time, we have been consistently improving our equipment offerings to meet the various needs of customers.

For instance, the blade used in the pouring mixer was updated from a conventional single blade to a cross blade and flow diversion blade, and now the high speed double blade design results in higher stirring efficiency. The driving method is updated from belt drive to variable frequency drive as it is now directly connected. Besides, each connecting piece is fine finished by us.

Currently, SANKON has obtained 19 patents for components applied in our AAC cutter, mold, transfer cart for AAC block pre-curing and batching automatic control system.

Market Prospect
For many years, SANKON has been focusing on the research and development of AAC machines, as well as collaborating with AAC product manufacturers and providing AAC production line solutions to these AAC product manufacturers. We have served hundreds of clients in the building materials industry and have achieved wide praise.

In recent years, we have developed quickly and achieved production value of tens of millions of dollars.