Steaming Trolley

Application

The curing trolley (see the picture) is special vehicle for shipping during the production. It is used to load the billet after cutting to the autoclave for curing, and then move to finished goods site, and it will load the billet to autoclave after being unloaded.

Structure

The curing trolley is composed of 2 main parts, frame and the wheel.

The frame is made of steel panel with good steel and easy structure.

The wheel is composed of vehicle, shaft and bearing, the rolling is very flexible and stable.

It has good decoupling shaft.

Work Principles

The bottom of the trolley is loaded billets cutting by the 2 mould. Attention: It should add washer to make sure it is flat between the frame and the floor surface, to avoid the frame to lean.

The trolley runs stably on the guide and the trolley is connected by the hook, the trolley then goes to the autoclave to cure the billet and move the billets to the finished goods site, and then the decouple will unload the hook.

Installmen

Assembly the wheel with reel, shaft, bearing, bearing sleeve and press end, the bearing is filled with colloidal graphite, and the clearance inside the wheel flange is 800^+0.0 mm.

The wheel is installed on the lower part of the frame, the surface in the same plane on four wheels.

Sankon designs and manufactures AAC block making plant, to meet the specific requirements of the market and cutstomers. As a new building material, AAC block fulfills the demand of concrete industry, which requires to save the natural resources and protect the environment.

Market Analysis
AAC is becoming more and more popular around the world, from western countries and then to developing countries. Below Properties make AAC have unmatchable property, especially for high buildings:
1) Extreme Light Weight
2) Large Variety of Sizes
3) High Fire Resistant
4) Excellent Thermal Insulation
5) Great Sound Insulation
6) Moisture Protection
7) Termite Resistant
8) High Workability and Easy Processing
AAC is produced out of a mix of cement, lime, fly ash, gangue, river sand and aluminium powder ect., through batching, mixing, casting, cuttimg and autoclaving. AAC has the advantages of extremely light weight, high compressive strength, excellent thermal insulation, great scousitc insulation and high fire resistance. AAC can be produced in a large variety of sizes, from stand blocks to large reinforced panels, and it can be cut, sawn, drilled, nailed and milled like wood, making it an extremely workable product, AAC is environment-friendly and new building material.
QGM Advantages:
Control System: Germany, Siemens PLC, main electrical components are from Germany Siemens, it
Weighing system are controlled by precise weighing system, guarantee the weighing accuracy. The accuracy will effect the qualified product rate, higher accuracy, higher qualified produce rate.
Steel silo storage, automatically control with arch breaker, level indicator.
With quality and service: A-Z Integrated solution for AAC brick making plant, the highly sophisticated manufacturing process.

Formerly known as Wuxi SANKON Automation Equipment Co., Ltd., Jiangsu SANKON Building Materials Technology Co. is an enterprise specializing in the research and development and production of a complete range of autoclaved aerated concrete (AAC) machines and AAC production lines. Since 2007, we have introduced a number of new types of building materials equipment. We have been actively analyzing cutting-edge technology from all over the world and have formed a professional technology team focused on the development of new and exciting processing equipment.

In July, 2014, Jiangsu SANKON Building Materials Technology Co., Ltd. was officially founded in Chuanjiang Town, Xinbei District, Changzhou City, Jiangsu Province, with a factory covering 44700 square meters. Today, we have more than 200 employees. The AAC machines manufactured by SANKON has been exported to a wide range of countries, like Russia, India, Iran, Saudi Arabia, Malaysia, Indonesia, Thailand, Vietnam, the United Arab Emirates, and more.

Professionalism
SANKON has always focused on the design and production of high efficiency AAC machines, resulting in the accumulation of valuable experience and engineering techniques.

Our technical team is made up of experts with more than 20 years of experience in the AAC industry. They are professionals with expertise in project design, production processes, and detail control. Some of them worked for the China AAC Institute before they came to SANKON, then they focused all of their efforts into the AAC industry.

With this excellent technical team, we are able to offer clients solutions and equipment that meets all relevant production quality requirements, as well as help building materials manufacturers maximize their economic returns.

Autonomous Production
With an annual production capacity of more than 9 thousand tons of equipment and workshops covering about 25 thousand square meters, SANKON is able to autonomously complete machining, painting, assembling, and testing processes. Parts like metal bodies, hydraulic pressure stations, electric control cabinets and so on are all produced by SANKON.

We are able to offer complete sets of equipment for AAC production line. SANKON is also able to precisely control the function and quality of each piece of equipment to meet customer needs.

Continuous Innovation
Based on German technology, we developed the AAC production lines with additional specifications. At the same time, we have been consistently improving our equipment offerings to meet the various needs of customers.

For instance, the blade used in the pouring mixer was updated from a conventional single blade to a cross blade and flow diversion blade, and now the high speed double blade design results in higher stirring efficiency. The driving method is updated from belt drive to variable frequency drive as it is now directly connected. Besides, each connecting piece is fine finished by us.

Currently, SANKON has obtained 19 patents for components applied in our AAC cutter, mold, transfer cart for AAC block pre-curing and batching automatic control system.

Market Prospect
For many years, SANKON has been focusing on the research and development of AAC machines, as well as collaborating with AAC product manufacturers and providing AAC production line solutions to these AAC product manufacturers. We have served hundreds of clients in the building materials industry and have achieved wide praise.

In recent years, we have developed quickly and achieved production value of tens of millions of dollars.