SANKON Building Materials Technology Co. LTD is a one stop solutions provider for autoclaved aerated concrete (AAC) production equipment including complete AAC production lines.

We manufacture a wide range of building material machines, including block making machines, concrete panel machines, dry mortar machines, and more.

Our main products include AAC block production line,ALC panel production line,ALC panel production installation of cinstruction equipment and their matched equipment.

Our production capacity are 50,000 m³, 100,000 m³, 150,000 m³, 200,000 m³, 300,000 m³, 400,000 m³ and other scale of the AAC brick macking machine.

Block Brick Machine-50m³ Storage Container

Application:

It is a container (refer to the picture) used to store the mixing slurry.

Technical Parameter:

1.Max size

W:ø 3600mm H:6033mm

2.Capacity:50m³(ø3600×5000)

3.Weight:9065 kg

4.Mixing technical parameter:

Helical gear reducer :CRM147-84.5-Y-18.5-V1,motor power :18.5Kw, Synchronous rotate speed 1470rpm,mixing speed17.4rpm

5.Pneumatic butterfly valve:D671X-10-150

Structure:

The storage container is composed of drum, reducer, mixer and butterfly valve

The drum is cylindrical, and it is casting by the concrete

The reducer is helical gear reducer

The mixer is welded by mixing shaft, steel panel and steel pipe

The discharge is controlled by the butterfly valve.

Work principles:

The storage container is to store the slurry after being mixed, which will make the slurry do not solidify. The slurry will be continued to mix inside the container to avoid any solidification, and the discharge is controlled by butterfly valve.

Commissioning and adjust

1.Trial running

The assembly of the storage container is ready and run it without any loading until the reducer rotates normally, no abnormal sound, and the mixing shaft is same with the middle line of the drum, the mixer should rotate stably.

2.Adjust

a.Disassemble and check the reducer bearing base if the reducer run unstably and there is abnormal sound.

b.The stirring shaft is inclined, the stirring blade swings, and the adjusting device of the stirring shaft is adjusted

Maintenance and Repair:

1.Maintenance and Repai

The mixing can not stop if the slurry is stored in the container, avoid any solidification

The lubricant oil can not be lower the oil level, it should add on time. It should change the lubricant oil once per 6 months

Wash all parts every month.

2.Repair

When wash the container, tighten the loose parts and replace the destroyed parts.

Cautio

Shut off the power before washing it and stop mixing

No one is allowed on the top of the drum when mixing.

Formerly known as Wuxi SANKON Automation Equipment Co., Ltd., Jiangsu SANKON Building Materials Technology Co. is an enterprise specializing in the research and development and production of a complete range of autoclaved aerated concrete (AAC) machines and AAC production lines. Since 2007, we have introduced a number of new types of building materials equipment. We have been actively analyzing cutting-edge technology from all over the world and have formed a professional technology team focused on the development of new and exciting processing equipment.

In July, 2014, Jiangsu SANKON Building Materials Technology Co., Ltd. was officially founded in Chuanjiang Town, Xinbei District, Changzhou City, Jiangsu Province, with a factory covering 44700 square meters. Today, we have more than 200 employees. The AAC machines manufactured by SANKON has been exported to a wide range of countries, like Russia, India, Iran, Saudi Arabia, Malaysia, Indonesia, Thailand, Vietnam, the United Arab Emirates, and more.

Professionalism
SANKON has always focused on the design and production of high efficiency AAC machines, resulting in the accumulation of valuable experience and engineering techniques.

Our technical team is made up of experts with more than 20 years of experience in the AAC industry. They are professionals with expertise in project design, production processes, and detail control. Some of them worked for the China AAC Institute before they came to SANKON, then they focused all of their efforts into the AAC industry.

With this excellent technical team, we are able to offer clients solutions and equipment that meets all relevant production quality requirements, as well as help building materials manufacturers maximize their economic returns.

Autonomous Production
With an annual production capacity of more than 9 thousand tons of equipment and workshops covering about 25 thousand square meters, SANKON is able to autonomously complete machining, painting, assembling, and testing processes. Parts like metal bodies, hydraulic pressure stations, electric control cabinets and so on are all produced by SANKON.

We are able to offer complete sets of equipment for AAC production line. SANKON is also able to precisely control the function and quality of each piece of equipment to meet customer needs.

Continuous Innovation
Based on German technology, we developed the AAC production lines with additional specifications. At the same time, we have been consistently improving our equipment offerings to meet the various needs of customers.

For instance, the blade used in the pouring mixer was updated from a conventional single blade to a cross blade and flow diversion blade, and now the high speed double blade design results in higher stirring efficiency. The driving method is updated from belt drive to variable frequency drive as it is now directly connected. Besides, each connecting piece is fine finished by us.

Currently, SANKON has obtained 19 patents for components applied in our AAC cutter, mold, transfer cart for AAC block pre-curing and batching automatic control system.

Market Prospect
For many years, SANKON has been focusing on the research and development of AAC machines, as well as collaborating with AAC product manufacturers and providing AAC production line solutions to these AAC product manufacturers. We have served hundreds of clients in the building materials industry and have achieved wide praise.

In recent years, we have developed quickly and achieved production value of tens of millions of dollars.